Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual page 99

To modify the configuration profile to use TLS
1 In the Symantec Management Console, on the Settings menu, click All
Settings.
2 In the left pane, click Remote Management > Out of Band Management >
Configuration Service Settings > Configuration Profiles.
3 Open the profile that you want to modify.
4 On the TLS tab, check Use TLS.
5 Click Local Interface: TLS Server Authentication. Click Network Interface:
TLS Server Authentication.
6 Select the Server Certificate from the drop-down list. If the list is empty, do
the following in order:
Click the Browse for Certificate Generation Properties symbol.
In the Select Certificate Generation Properties dialog box, click the Add
symbol to add a new certification authority (CA) to the list.
Specify the CA settings in the Add Certificate Generation Properties
dialog box.
The default template for TLS is WebServer.
Click OK.
On the Select Certificate Generation Properties page, click the CA that
you just added, and then click OK.
7
Click OK to close the profile.
To reconfigure Intel AMT computers
1 In the Symantec Management Console, on the Settings menu, click All
Settings.
2
In the left pane, click Remote Management > Out of Band Management >
Intel AMT Systems > Intel AMT Systems.
3 (Optional) Click the computers that you want to reconfigure.
4 On the toolbar, click the Re-configure symbol.
The reconfiguration process is initiated.
After reconfiguration, the communications with Intel AMT computers are
secure.
Configuring TLS 99
Configuring TLS