Configuring Intel Amt Computers For Out-Of-Band; Management; About Configuring Intel Amt Computers For Out-Of-Band Management - Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual

Configuring Intel AMT
computers for out-of-band

management

This chapter includes the following topics:
About configuring Intel AMT computers for
out-of-band management
Before you can manage Intel AMT computers out of band, you must configure the
Intel AMT devices.
Configuration of Intel AMT computers in enterprise mode consists of the following
stages:
Initialization

About configuring Intel AMT computers for out-of-band management

Prerequisites for Intel AMT configuration
Configuring Intel AMT computers for out-of-band management
About resending Hello messages
Configuring Intel AMT computers in small business mode
You initialize Intel AMT computers by installing PID-PPS pairs into the
Intel AMT firmware either manually or automatically (using the Remote
Configuration feature).
See "About Intel AMT initialization"
Chapter
on page 58.
6