Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual page 66

66 Configuring Intel AMT computers for out-of-band management
Configuring Intel AMT computers for out-of-band management
See "Initializing Intel AMT computers manually "
Computers with Intel AMT 3.0 and later support bare-metal Remote Configuration
(configuration without the need for an operating system).
Note: Computers with Intel AMT 2.2 and 2.6 are also capable of automatic remote
configuration, but require a software agent to initiate the Remote Configuration
process.
See "Resending Hello messages with the Delayed Configuration policy"
See "Configuring Intel AMT computers for out-of-band management"
Process for initializing Intel AMT configuring using the Remote
Table 6-2
Configuration feature
Step Action
Step 1 Learn how Remote Configuration
works.
Step 2 Make sure you meet the
requirements for this feature.
Step 3 Configure your OOB site server for
remote configuration.
Step 4 Configure Out of Band
Management Component for
remote configuration.
Step 5 Start the Remote Configuration.
on page 76.
Description
Understand what certificates you need
and how Remote Configuration works.
See "About the Intel AMT Remote
Configuration feature" on page 67.
You must prepare your environment to
support Remote Configuration.
See "Prerequisites for using the Remote
Configuration feature" on page 69.
You must generate and install
certificates.
See "Configuring your OOB site server
computer (by default, the Notification
Server computer) for Remote
Configuration" on page 69.
Enable the Remote Configuration
feature support in Intel SCS.
See "Enabling the Remote
Configuration feature in Out of Band
Management Component"
Start and monitor the Remote
Configuration process.
See "Starting the Intel AMT Remote
Configuration" on page 75.
on page 89.
on page 61.
on page 75.