Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual page 114

114 Configuring ASF/DASH computers for out-of-band management
Configuring ASF/DASH computers for out-of-band management
This topic describes how to get the ASF or the DASH settings (inventory) from
client computers. The ASF/DASH inventory is collected and sent to Notification
Server in the standard Notification Server Inventory format.
Note: The Out of Band Task Agent must be installed on the client computers
before you run the task. The client computer must be turned on to run this task.
The operating system must be running.
See "Preparing target computers for management"
See "Configuring ASF/DASH computers for out-of-band management"
To collect ASF or DASH inventory
1 In the Symantec Management Console, on the Manage menu, click Jobs and
Tasks.
2
In the left pane, click Samples > Remote Management > ASF/DASH Tasks
> Get ASF/DASH Configuration Inventory.
3 Run the task one time or on a schedule.
For more information, view topics about running and scheduling tasks in the
Symantec Management Platform Help.
To view the ASF/DASH inventory for a client
1 Open the Resource Manager for the computer.
To open the Resource Manager, double-click (or right-click and then click
Resource Manager) on a specific resource that is found in a filter or in any
grid that displays resources, such as a report.
For more information, view topics about the Resource Manager in the
Symantec Management Platform Help.
2
On the View menu, click Inventory, and then click Data Classes > Out of
Band Management.
3
Click an inventory data class:
OOB Broadcom ASF Alert Service
OOB Broadcom ASF Remote Functions
OOB Broadcom ASF Security
OOB Broadcom DASH General Settings
OOB Intel ASF Adapters
OOB Intel ASF Alert Service
on page 49.
on page 111.