Configuring Asf/Dash Computers For Out-Of-Band Management; What To Do Next - Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual

Configuring ASF/DASH computers for out-of-band management

What to do next

OOB Intel ASF Alerts
OOB Intel ASF Heartbeats
OOB Intel ASF Remote Functions
OOB Intel ASF Watchdog
(In-band procedure)
You can enable and configure ASF or DASH settings remotely on client computers.
Note: The Out of Band Task Agent must be installed on the client computers
before you run the task. The client computer must be turned on to run this task.
The operating system must be running.
See "Preparing target computers for management"
See "Configuring ASF/DASH computers for out-of-band management"
To configure ASF or DASH settings
1 In the Symantec Management Console, on the Manage menu, click Jobs and
Tasks.
2 In the left pane, click Samples > Remote Management > ASF/DASH Tasks
> Update ASF Configuration Settings or Samples > Remote Management >
ASF/DASH Tasks > Update DASH Configuration Settings.
3 Configure settings.
If you check Modify ... settings the settings that are shown in the group are
modified when the task runs. If you uncheck Modify ... settings, the settings
on the target computer are not altered when the task runs.
See "Get ASF/DASH Configuration Inventory task"
See "Update DASH Configuration Settings task"
4 Run the task one time or on a schedule.
For more information, view topics about running and scheduling tasks in the
Symantec Management Platform Help.
Your computers are ready to be managed out of band.
Configuring ASF/DASH computers for out-of-band management
What to do next
on page 49.
on page 111.
on page 156.
on page 160.
115