Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual page 103

22 Type
2.16.840.1.113741.1.2.1
OK.
23 Click TLS Mutual Authentication, and then click OK.
24 Click OK.
25
Click OK to save and close the properties of the new template.
Issuing the new template for mutual authentication
You must issue the new template that you created.
See "Creating and installing a client certificate using an Enterprise CA"
To issue the template
1 On the computer with the certification authority (CA) installed, click Start >
Control Panel > Administrative Tools > Certification Authority.
2 In the left pane, click your CA, right-click Certificate Templates, and then
click New > Certificate Template to Issue.
3 In the Enable Certificate Templates dialog box, click AMT Mutual, and then
click OK.
Requesting and installing a new certificate for mutual
authentication
Now you must request a new certificate from your local online CA, based on the
template that you created.
Note: In case of a default Out of Band Management Component installation,
perform this procedure on the Notification Server computer. If you installed the
Out of Band site server on a computer other than Notification Server, you must
perform this procedure on the Notification Server computer and on each of the
Out of Band site server computers.
You can create the certificate manually, or you can use the Certificate Enrollment
task to automatically request and install the certificate.
See "Creating and installing a client certificate using an Enterprise CA"
To request and install the certificate with a task
1
In the Symantec Management Console, on the Manage menu, click Jobs and
Tasks.
2 In the left pane, click Samples > Remote Management > Intel SCS Tasks and
Jobs > Certificate Enrollment.
Configuring TLS with mutual authentication
in the Object identifier box, and then click
Configuring TLS 103
on page 100.
on page 100.