Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual page 151

Options on the Intel AMT systems page
Table 10-21
Option
Authorize systems
Update ACL
Renew RNG key
Update power policy
Synchronize clock
Change connection
state
About Out of Band Management Component pages
Description
This operation authorizes configuration for the selected devices.
This operation becomes available when you check Intel AMT
requires authorization before configuration on the General
page.
See "General page " on page 142.
If you have computers in delayed configuration state and checked
One time password required on the General page, then a
one-time password is required to authorize computers. Normally,
Intel SCS knows the one-time password that it has set on the Intel
AMT device at the time the Delayed Configuration policy has run.
But you can also check Override OTP and specify a password
manually.
See "Delayed Setup and Configuration page"
This operation updates the list of Intel AMT users, according to
the ACL entries in the profile that is associated with each device
and their access privileges.
See "Setup and configuration profile: ACL tab"
This operation resets the random number generator key for
selected devices.
This operation updates the power policy for all devices according
to the parameters that are defined in the profiles.
See "Setup and configuration profile: Power Policy tab"
on page 139.
This operation synchronizes the clocks between the Intel AMT
devices and Intel SCS.
This operation changes the computer's connection state.
When the state is Not connected, Intel SCS cannot communicate
with the Intel AMT device.
Intel AMT systems page
on page 149.
on page 137.
151