Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual page 180

180 Reference topics
About populating filters
Out of Band Management Component ASF/DASH filters
Table B-2
Filter
ASF capable computers
DASH capable
computers
Broadcom ASF capable
computers
BroadcomDASHcapable
computers
Computers with ASF
Enabled
Description
This filter is populated using the Out of Band Discovery Task
through the Altiris Agent. This task copies down an .exe that
executes and checks the target computer for ASF functionality.
This task detects ASF capabilities of the target computers even
if ASF is not configured or not enabled in BIOS.
See "Discovering out-of-band capable computers"
This filter is populated using the Out of Band Discovery Task
through the Altiris Agent. This task copies down an .exe that
executes and checks the target computer for DASH
functionality. This task detects DASH capabilities of the target
computers even if DASH is not configured or not enabled in
BIOS.
See "Discovering out-of-band capable computers"
This filter is populated using the Out of Band Discovery Task
through the Altiris Agent. This task copies down an .exe that
executes and checks the target computer for ASF functionality.
This task detects ASF capabilities of the target computers even
if ASF is not configured or not enabled in BIOS.
See "Discovering out-of-band capable computers"
This filter is populated using the Out of Band Discovery Task
through the Altiris Agent. This task copies down an .exe that
executes and checks the target computer for DASH
functionality. This task detects DASH capabilities of the target
computers even if DASH is not configured or not enabled in
BIOS.
See "Discovering out-of-band capable computers"
This filter shows ASF capable computers with ASF functionality
enabled in BIOS.
This filter is populated using the Out of Band Discovery Task
through the Altiris Agent. This task copies down an .exe that
executes and checks the target computer for ASF functionality.
This task detects ASF capabilities of the target computers even
if ASF is not configured or not enabled in BIOS.
See "Discovering out-of-band capable computers"
on page 52.
on page 52.
on page 52.
on page 52.
on page 52.