Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual page 152

152 About Out of Band Management Component pages
Intel AMT systems page
Options on the Intel AMT systems page (continued)
Table 10-21
Option
Assign profile
Create assignments
Re-configure
Description
This operation lets you assign an FQDN and a configuration
profile to the selected Intel AMT device.
Unconfigured device is configured using the supplied FQDN and
profile the next time the Hello message is sent. If the device is
already configured, you can check Re-configure if settings change
to apply new settings to the Intel AMT device. You can also
re-configure the computer later using the Re-configure symbol
on the toolbar.
See "Assigning a profile to a single computer manually"
on page 86.
This operation lets you assign profiles to multiple Intel AMT
computers.
Check Override existing profile assignments to assign the profile
that is defined on this page to the Intel AMT computers that
already have a configuration profile assigned.
This option changes the profile assignment, but does not
re-configure the Intel AMT device with the new configuration
profile. If you want to re-configure Intel AMT devices, check
Re-configure Intel AMT if assignments change.
See "Assigning a profile to multiple computers manually"
on page 86.
This operation applies all the current settings in the profile that
is associated with each Intel AMT device.