Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual page 73

6
From the Certificate Template drop-down list, click the template that you
prepared and issued earlier (in this example, click AMT Remote
Configuration).
See "Preparing a certificate template for Remote Configuration"
See "Issuing the new certificate template for Remote Configuration"
on page 72.
7 In the Name box, type the FQDN of the OOB site server computer (by default,
the Notification Server computer).
For example:
provisionserver.west.yourenterprise.com
8
In the Department box, type the following string exactly as follows:
Intel(R) Client Setup Certificate
9
Fill in the email, company, city, state, and country boxes with your company s
data.
Note that you must type the full name of the state: for example, type
instead of . Verisign® fails to issue the certificate if the state name is
TX
abbreviated.
10 Under Key Options, in the Key Size box, type
11
Check Mark keys as exportable.
12 Under Additional Options, click PKCS10.
13 If you are preparing a certificate request for a commercial certificate provider:
Check Save request to a file.
Type the full path name of the request file to create in the Full path name
box.
For example:
c:\request.txt
Click Save.
The certificate request is created and written to the file that you specified.
Acquire and install a certificate from an external certificate vendor.
See "Acquiring and installing a certificate from an external certificate
vendor" on page 74.
14 If you are preparing a certificate request for your own certification authority:
Click Submit.
Click Install this certificate to install the certificate.
Configuring Intel AMT computers for out-of-band management
Configuring Intel AMT computers for out-of-band management
on page 70.
.
1024
73
Texas