Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual page 70

70 Configuring Intel AMT computers for out-of-band management
Configuring Intel AMT computers for out-of-band management
Process for configuring your OOB site server computer for Remote
Table 6-3
Configuration (continued)
Step Action
Step 2 Issue the new template.
Step 3 Prepare a certificate request.
Step 4 Acquire the certificate.
See "Initializing Intel AMT computers using the Remote Configuration feature"
on page 65.
Preparing a certificate template for Remote Configuration
You must create a new certificate template that you will use to request a certificate.
See "Configuring your OOB site server computer (by default, the Notification
Server computer) for Remote Configuration"
To prepare a certificate template for Remote Configuration
1 On the computer with the certification authority (CA) installed, click Start >
Run.
2
In the Open box, type
3 In the Microsoft Management Console, click File > Add/Remote Snap-in.
4 Click Add.
5
Click Certificate Templates, click Add, and then click Close.
Description
You must publich the certificate
template so that a certification
authority (CA) can issue certificates
based on it.
See
template for Remote Configuration"
on page 72.
Certificate request lets you get a
certificate from a CA.
See
Remote Configuration"
(Optional)
This step is only required if you
purchase the certificate from an
external certificate vendor.
See
certificate from an external certificate
vendor"
on page 69.
, and then click OK.
mmc
"Issuing the new certificate
"Preparing a certificate request for
on page 72.
"Acquiring and installing a
on page 74.