Configuring The Oob Site Server Installation Settings; Rolling Out The Oob Site Server - Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual

120 Deploying OOB site servers
Installing an OOB site server

Configuring the OOB site server installation settings

Rolling out the OOB site server

See "Installing an OOB site server"
To view the OOB site server candidate computers
1
In the Symantec Management Console, on the Manage menu, click Filters.
2
In the left pane, click Out of Band Management > Out of Band Site Service
Filters > Potential Out of Band Site Servers.
Before you install the OOB site server, configure the settings that you want the
server to use when it is being installed.
All OOB site servers must use the same settings. If you change the settings, all
other existing OOB site servers are automatically reinstalled using the new settings.
See "Installing an OOB site server"
To configure the OOB site server installation settings
1 In the Symantec Management Console, on the Settings menu, click
Notification Server > Site Server Settings.
2
In the left pane, click Site Management > Settings > OOB Service > OOB
Service Configuration.
3
In the right pane, configure the settings.
For help, press F1 or click Help > Context.
See "OOB Site Service page"
4 Click Save changes.
You can install the OOB site server on a supported computer.
See "About OOB site servers"
See "Prerequisites for OOB site server installation"
After you install an OOB site server in a subnet, you must configure the DNS server
for that subnet to resolve the ProvisionServer host name to this OOB site server
computer.
See "About configuring DNS"
See "Installing an OOB site server"
on page 119.
on page 119.
on page 161.
on page 118.
on page 118.
on page 33.
on page 119.