About Client Computer Software And Hardware Requirements - Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual

44 Installing Out of Band Management Component
System requirements

About client computer software and hardware requirements

See "Where to get more information"
Microsoft SQL Server 2005.
See "About configuring SQL server"
SQL server is configured in mixed authentication mode.
See "About configuring SQL server"
Out of Band Management Component also requires that you configure your
environment, such as DNS, DHCP, and so on.
See "About environment requirements"
You can configure the environment before or after you install Out of Band
Management Component.
The client computers that you want to configure for out-of-band management
with Out of Band Management Component must meet certain hardware and
software requirements. The client computers must support one of the out-of-band
management technologies.
Client computer software requirements
Table 3-1
Requirement
Hardware
Operating system
Client computer out-of-band technology requirements
Table 3-2
Technology
Intel AMT 2.0, 2.1, 2.2, 2.5, 2.6, 3.0, 4.0, 5.0
and later
Broadcom ASF 2.0 or Intel ASF 2.0
Broadcom DASH
on page 27.
on page 34.
on page 34.
on page 32.
Description
60 MB free hard disk space
64 MB RAM (128 MB recommended)
Windows 2003 Server SP2 or later
Windows XP SP2 or later
Description
Computers with Intel AMT have an Intel
vPro or Centrino Pro label on them.
The Broadcom and Intel implementations of
ASF are supported.
Broadcom implementation of DASH
technology is supported.