Resending Hello Messages With The Send Intel Amt Hello Message Task - Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual

90 Configuring Intel AMT computers for out-of-band management
About resending Hello messages

Resending Hello messages with the Send Intel AMT Hello Message task

3 In the Symantec Management Console, on the Settings menu, click All
Settings.
4 In the left pane, click Remote Management > Out of Band Management >
Intel AMT Systems > Delayed Setup and Configuration.
5 In the right pane, configure and enable the Delayed Setup and Configuration
policy.
For help, in the Symantec Management Console, on the Help menu, click
Context.
See "Delayed Setup and Configuration page"
The Send Intel AMT Hello Message task lets you simulate sending a Hello packet
to Intel SCS. Intel SCS responds to this Hello packet and starts configuring the
computer's Intel AMT device.
Resending Hello messages with the Send Intel AMT Hello Message task is an
in-band functionality and requires the Windows operating system to be running
and the Altiris Agent to be installed on the Intel AMT computer.
See "About resending Hello messages"
To run the Send Intel AMT Hello Message task
1
Install the Altiris Agent on the Intel AMT computers, if it is not already
installed.
See "Installing the Altiris Agent"
2 Install the Out of Band Task Agent on the client computer, if it is not already
installed.
See "Installing the Out of Band Task Agent"
3 In the Symantec Management Console, on the Manage menu, click Jobs and
Tasks.
4
In the left pane, click Samples > Remote Management > Intel SCS tasks and
jobs > Send Intel AMT Hello Message.
5 In the right pane, select the OOB site server to which you want the target
computer to send the Hello packet.
6 Run the task one time or on a schedule.
For more information, view topics about running and scheduling tasks in the
Symantec Management Platform Help.
on page 149.
on page 89.
on page 51.
on page 53.