About Ports Used By Intel Amt; About Installing Out Of Band Management Component In A Lab Environment - Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual

40 Planning for Out of Band Management Component installation

About ports used by Intel AMT

About ports used by Intel AMT
About installing Out of Band Management Component
in a lab environment
4 Click OK.
5 Click OK.
To configure a firewall to allow SQL server connections
1 Open the Control Panel on the computer with SQL Server installed, and then
click Windows Firewall.
2 In the Windows Firewall dialog box, on the Exceptions tab, click Add
Program.
3 Click Browse, and navigate to the instance of SQL Server that you want to
access through the firewall, and then click Open.
For example, browse to
Server\MSSQL.1\MSSQL\Binn\Sqlservr.exe
Note that the path may be different depending on where SQL Server 2005 is
installed and which instance you are using.
4 Click OK.
5
Click OK.
If you still cannot connect to the SQL server remotely, try adding TCP port
1433 to the firewall exceptions list.
By default, Intel SCS (a component of the OOB site server) listens on port 9971.
Intel AMT devices send their Hello packets to this port.
Intel SCS and Altiris solutions that support out-of-band management communicate
with Intel AMT devices using the following ports:
In non-secure mode, Intel AMT devices listen on port 16992
In TLS mode, Intel AMT devices listen on port 16993
See "Configuring a firewall to allow Intel SCS and SQL server connections"
on page 39.
To evaluate Out of Band Management Component, you only need a server in a lab
environment with the minimum requirements and a few out-of-band capable
client computers. This configuration lets you run through the installation and
C:\Program Files\Microsoft SQL
.