Altiris Products That Can Manage Computers Out Of Band; What S New In Out Of Band Management Component; How Out Of Band Management Component Works - Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual

Altiris products that can manage computers out of band

What s new in Out of Band Management Component

How Out of Band Management Component works

Intel® Active Management Technology (Intel® AMT) 2.0 and later (also known
as Intel® vPro and Intel® Centrino® Pro technology)
See "About Intel AMT"
Broadcom ASF 2.0 and Intel ASF 2.0
See "About ASF" on page 24.
Broadcom DASH
See "About DASH"
You can manage computers out of band using the following Altiris products:
Altiris Real-Time Console Infrastructure
Altiris Real-Time System Manager
These Altiris products let you perform the following out-of-band management
tasks:
Turn on, turn off, or restart computers.
Configure hardware alerts and change the alerts destination address.
Collect the hardware information that is stored in the NVRAM of the Intel
AMT device.
Boot a computer from a remote disk or an image on a server and run the
operating system repair or reinstall.
Start a remote control session from the Symantec Management Console and
access BIOS to view and change settings (Intel AMT only).
In the 7.0 SP3 release of Out of Band Management Component, the following new
features are introduced:
Support for Microsoft Windows 7.
You can install Out of Band Task Agent on the computers that are running
Microsoft Windows 7.
Out of Band Management Component installs Intel SCS on the Notification Server
computer and integrates it into the Symantec Management Console. From the
Introducing Out of Band Management Component
What s new in Out of Band Management Component
on page 16.
on page 25.
15