Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual page 83

See "About Intel AMT setup and configuration"
After you set up and configure Intel AMT computers you can perform the following
actions:
Manage Intel AMT computers out of band with Altiris solutions that support
out-of-band technologies.
See "Altiris products that can manage computers out of band"
Configure additional parameters in the setup and configuration profile (such
as users, power-saving options).
See "Creating Intel AMT configuration profiles"
Run Intel AMT maintenance tasks.
See "Maintenance page"
Configure your Intel AMT computers to use TLS or TLS with Mutual
Authentication for secure communications.
See "About TLS" on page 95.
See "Configuring Intel AMT computers for out-of-band management"
Process for setting up and configuring Intel AMT computers
Table 6-4
Step Action
Step 1 Understand the Intel SCS
interface in the Symantec
Management Console.
Step 2 Assign a configuration profile to
Intel AMT computers, if not
already assigned.
Step 3 Watch the Intel AMT computers
getting configured.
Configuring Intel AMT computers for out-of-band management
Configuring Intel AMT computers for out-of-band management
on page 145.
Description
Out of Band Management Component
displays Intel SCS management pages
in the Symantec Management Console.
See
interface"
Configuration profile defines Intel AMT
configuration parameters.
See
profile"
The Intel SCS pages in the Symantec
Management Console let you view the
status of Intel AMT devices.
See
configuration process"
on page 59.
on page 15.
on page 62.
on page 61.
"Understanding the Intel SCS
on page 84.
"About assigning a configuration
on page 85.
"About monitoring the setup and
on page 87.
83