Installing The Broadcom Asf Management Software; Collecting Asf/Dash Configuration And Hardware Inventory - Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - IMPLEMENTATION GUIDE V1.0 Implementation Manual

Installing the Broadcom ASF management software

Collecting ASF/DASH configuration and hardware inventory

Process for configuring ASF/DASH computers for out-of-band
Table 8-1
management (continued)
Step Action
Step 7 (Optional) Collect the ASF/DASH
configuration inventory.
Step 8 Configure the ASF or DASH
capable computers.
(Broadcom ASF only)
If you want to configure Broadcom ASF-capable computers for out-of-band
management, you must have the ASF management software installed on these
computers.
If the ASF management software is not installed on the Broadcom ASF-capable
computers, you must install the software manually.
You can obtain the Broadcom ASF Management Application from an installation
CD that comes with the computer or from the Broadcom Web site:
http://www.broadcom.com
For computers with Intel ASF, Out of Band Management Component installs the
Intel ASF management software automatically. This software is installed when
you roll out the Out of Band Task Agent.
See "Installing the Out of Band Task Agent"
See "Configuring ASF/DASH computers for out-of-band management"
(In-band procedure)
Configuring ASF/DASH computers for out-of-band management
Configuring ASF/DASH computers for out-of-band management
Description
If you want, you can collect current
configuration inventory from the client
computers.
You can view ASF/DASH inventory in
the Resource Manager.
See
configuration and hardware inventory"
on page 113.
The ASF/DASH configuration tasks let
you configure ASF/DASH computers
for out-of-band management.
See
for out-of-band management"
on page 115.
on page 53.
"Collecting ASF/DASH
"Configuring ASF/DASH computers
on page 111.
113