Using DCR Features Through CLI
Changing DCR Mode Using dcrcli
Step 1
Step 2
Step 3
Step 1
Step 2
Step 3
Step 1
Step 2
Step 3
User Guide for CiscoWorks Common Services
4-42
To change mode to Master:
Enter NMSROOT
/bin/dcrcli
Enter the password corresponding to the username
Enter
setmaster
The DCR mode gets changed to Master.
To change mode to Standalone:
Enter NMSROOT
/bin/dcrcli
Enter the password corresponding to the username
Enter
setstand
The DCR mode gets changed to Standalone.
To change mode to Slave:
Enter NMSROOT
/bin/dcrcli
Enter the password corresponding to the username
Enter
setslave master=
You have to specify the Master for this slave.
The DCR mode gets changed to Slave. For example,
setslave master=1.2.1.3 port=443
Chapter 4
-u username.
-u username.
-u username.
value
Managing Device and Credentials
78-16571-01