Changing The Mode To Master; Changing The Mode To Slave - Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual

Administering Device and Credential Repository

Changing the Mode to Master

Step 1
Step 2

Changing the Mode to Slave

Step 1
Step 2
Step 3
Step 4
User Guide for CiscoWorks Common Services
4-28
Before you change the mode to Slave, ensure that
Prerequisites are in place.
Select the Master radio button.
Click Apply to change mode.
Before you change the mode to Slave, ensure that
Prerequisites are in place.
You need to perform the following tasks:
Select the Slave radio button.
Enter the hostname of the Master in the Master field.
This hostname should exactly match the Hostname field in the Master's
Note
Self Signed Certificate.
Specify the SSL port of the master. Default is 443.
If the mode is changed from Master to Slave, select the Inform Current
•
slave(s) of new Master Hostname check box.
If you select this check box, all the slaves of the Master (whose mode you
currently changed to Slave) will be informed of the new master hostname.
That is, they will become the slaves of the new Master.
If the Add new devices to Master check box is selected, the devices in Slave
•
will be added to the new Master. However, any duplicates will be discarded.
Click Apply.
Chapter 4 Managing Device and Credentials
Master-Slave Configuration
Master-Slave Configuration
78-16571-01