Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual page 242

Frequently Asked Questions
Change the value of OSAGENT_PORT and PX_OSA_PORT from
Step 7
42342 to 44444.
Step 8 Open the file NMSROOT\lib\classpath\md.properties, in any plain text editor,
such as Notepad.
Step 9 Change the value of OSAGENT_PORT and PX_OSA_PORT from
42342 to 44444.
Reboot the server.
Step 10
NMSROOT is the installation directory for CiscoWorks Server.
Q.
A.
Stop daemons.
Step 1
Step 2 Make sure that no CSCO processes are running.
Make sure all ports used by CiscoWorks are free.
Step 3
To do this, enter:
netstat -na | grep 423
netstat -na | grep 174
If these ports are free, you will not see any output.
Verify whether the port 44444 is free, using the following command:
Step 4
netstat -na | grep 44444
If the port is free, you will not see any output.
Back up $NMSROOT/objects/dmgt/dmgtd.conf file.
Step 5
User Guide for CiscoWorks Common Services
8-16
How do I change port for osagent in Solaris?
To do this:
Chapter 8 Diagnosing Problems With CiscoWorks Server
78-16571-01