Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual page 249

Chapter 8 Diagnosing Problems With CiscoWorks Server
Q.
A.
From the Command Line Interface, enter:
show ip ssh
or
show ssh
Q.
A.
Q.
A.
At the command prompt, enter:
Step 1
NMSROOT\setup\support resetCasuser.exe
You are provided with three options:
1.
2.
3.
Enter 2, and press Enter.
Step 2
It prompts you to enter the password.
78-16571-01
How to verify which version of SSH is running on my system?
You can verify the SSH version that is running on your system using the
commands:
Is it possible to have both CiscoWorks and ACS on the same machine?
No. This is because ACS mandates CiscoWorks to be configured as an
AAA client in it for CiscoWorks to avail AAA service. At the same time, ACS
does not allow itself to be configured as an AAA client, which is required
when ACS and CiscoWorks coexists. Hence the configuration required for
ACS integration will fail.
How do I change the casuser password?
You can change the casuser password using resetCasuser.exe. It can be
executed only by an administrator or casuser. To change the casuser
password, do the following:
Randomly generate the password
Enter the password
Exit.
User Guide for CiscoWorks Common Services
Frequently Asked Questions
8-23