Editing Device Credentials - Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual

Chapter 4 Managing Device and Credentials

Editing Device Credentials

Step 1
Step 2
Step 3
Step 4
Step 5
78-16571-01
You can edit device information using this feature.
To edit device information:
In the CiscoWorks Homepage, select Common Services > Device and
Credentials > Device Management.
The Device Management page appears.
Select one or more devices from the Device Summary List and click Edit.
The Device Properties page displays the Devices Information dialog box.
You can edit the attributes of individual devices here. The Devices column lists
all the selected devices.
From the Devices column, you should separately select each device that needs to
be edited, and make the required changes.
Select the device for which you want to edit the device information, from the
device list.
The current attributes are automatically populated in the device information
fields.
Edit the device information, on the right pane.
If you are done with your editing and do not want to proceed, click Finish.
Click Next, if you want to edit device credentials.
The Credential Template dialog box appears. According to your requirement, you
can edit:
Primary Credentials (Username, Password, Enable Password)
•
SNMP v2C credentials (Read-Only Community String, Read-Write
•
Community String)
SNMPv3 Credentials (Username, Password, authentication Algorithm,
•
Engine ID)
Rx Boot Mode Credentials (Username, Password)
•
Auto Update Server Managed Device credentials (Username, Password)
•
Any changes made here will apply to all devices selected in Step 2. This has one
exception.
User Guide for CiscoWorks Common Services
Managing Devices
4-13