Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual page 241

Chapter 8 Diagnosing Problems With CiscoWorks Server
Q.
A.
cwjava -cw NMSROOT com.cisco.nm.cmf.jrm.jobcli
To check whether jrm is working on Solaris, at the command prompt enter
cwjava -cw $NMSROOT com.cisco.nm.cmf.jrm.jobcli
Q.
A.
Backup your Windows registry.
Step 1
In the Registry Editor, navigate to HKEY_LOCAL_MACHINE > SOFTWARE
Step 2
> Cisco > Resource Manager > Current Version > Daemon > RmeOrb
Change the value of Args from
Step 3
-p 44444.
Navigate to HKEY_LOCAL_MACHINE > SOFTWARE > Cisco > Resource
Step 4
Manager > Current Version > Daemon > RmeGatekeeper
Change the value of Args from
Step 5
-DNMSROOT=NMSROOT -DORBagentPort=42342
com.visigenic.vbroker.gatekeeper.GateKeeper -props
NMSROOT\lib\visigenics\gatekeeper.cfg
to
-DNMSROOT=NMSROOT -DORBagentPort=44444
com.visigenic.vbroker.gatekeeper.GateKeeper -props
NMSROOT\lib\visigenics\gatekeeper.cfg
Navigate to HKEY_LOCAL_MACHINE > SOFTWARE > Cisco > Resource
Step 6
Manager > Current Version > Environment:
78-16571-01
How do I ensure that jrm is running fine?
To check whether jrm is working on Windows, at the command prompt enter:
If you get a message
•
EDS-GCF and jrm are running.
If you do not get the above message, contact the technical assistance center
•
with the error message.
If your jrm in down or inaccessible, you'll get a message while accessing the
•
UIs.
How do I change the port for osagent in Windows?
To change the port for osagent in Windows:
Established connection with JRM
to an unused port number, for example
-p 42342
User Guide for CiscoWorks Common Services
Frequently Asked Questions
, then EDS,
8-15