Cluster Managed Type - Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual

Chapter 4 Managing Device and Credentials
Step 3
Step 4
Step 5
Step 6

Cluster Managed Type

Step 1
Step 2
78-16571-01
Click Add to List.
The device gets added to the Added Device List in the window.
To remove the device from the Device List, select the device and click Remove
from List.
Click Next.
The Credential Template dialog box appears.
Enter the Auto Update Server managed device credentials (Username, Password)
in the corresponding fields and click Next.
The User Defined Fields dialog box appears.
Enter your selections for User-defined fields and click Finish.
You can define four attribute fields for a device. These fields are used to store
additional user-defined data for a device.
The attribute fields that appear here can be changed at Device and Credentials >
Admin> User Defined Fields.
DCR supports Cisco Clusters and their member devices using a mix of standard
and additional attributes and credentials.
To add devices and credentials using Cluster Managed type:
Select the Cluster Managed radio button.
Enter Device Type, Display Name, Device IP address, Device Host Name,
Domain Name, Cluster, and Member Number in the corresponding fields. For
member devices, member number and display name are enough for identity.
The Member Number field is mandatory. The Member Number is the number of
the Cluster member. This number represents the order in which the device is
added into the cluster.
Also, Cluster needs to be added before a Cluster Managed device.
For example, if a device X belongs to cluster Y, first add the Cluster Y, and then
add the Cluster Managed device X.
User Guide for CiscoWorks Common Services
Managing Devices
4-11