Deleting Peer Certificates; Enabling Single Sign-On - Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual

Chapter 3 Configuring the Server
Step 4
Step 5

Deleting Peer Certificates

Step 1
Step 2
.

Enabling Single Sign-On

78-16571-01
Enter the value of the Non-SSL(HTTP) Port of the peer CiscoWorks Server.
Click OK.
The default Non-SSL(HTTP) Port of the peer CiscoWorks Server is 1741.
To delete peer certificates:
Select the check box corresponding to the certificate you want to delete.
Click Delete.
You can also view the details of the client certificates. For this, select the
check box corresponding to the certificate and click View.
With Single Sign-On (SSO), you can use your browser session to transparently
navigate to multiple CiscoWorks Servers without authenticating to each of them.
Communication between multiple CiscoWorks Servers is enabled by a trust model
addressed by Certificates and shared secrets.
The following tasks need to be done initially:
One of the CiscoWorks Servers should be set up as the authentication server.
•
Trust should be built between the CiscoWorks Servers, using self signed
•
certificates. A trusted certificate is created by adding it in the trust key store
of the server. CiscoWorks TrustStore or KeyStore
certificate management framework in Common Services.
Each CiscoWorks Server should setup a shared secret with the authentication
•
server. The System Identity user password acts as a secret key for SSO.
The SSO authentication server is called the Master, and the SSO regular server is
called the Slave.
User Guide for CiscoWorks Common Services
Enabling Single Sign-On
is maintained by the
3-15