Master-Slave Configuration Prerequisites; Changing The Mode To Standalone - Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual

Chapter 4 Managing Device and Credentials

Master-Slave Configuration Prerequisites

Step 1
Step 2
Step 3
Step 4

Changing the Mode to Standalone

Step 1
Step 2
78-16571-01
Before you set up the Master and Slave, you have to perform certain tasks to
ensure that secure communication takes place between the Master and Slave.
If machine M is to be the Master and S is to be the Slave:
In M add a Peer Server User and password.
See "Setting up Peer Server Account" section on page 3-11
In S add a System Identity user and password. This should be same as the Peer
Server User set up in M.
See "Setting up System Identity Account" section on page
Copy the Self-Signed Certificate of S to M. Also, copy the Self-Signed Certificate
of M to S.
See "Creating Self Signed Certificate" section on page
Self-Signed Certificate.
See "Setting up Peer Server Certificate" section on page
copying Peer Certificate.
Now configure S as Slave and M as Master.
Select the Standalone radio button.
Click Apply to change mode.
The default DCR mode is Standalone.
Administering Device and Credential Repository
User Guide for CiscoWorks Common Services
for details.
3-13, for details.
3-9, for details on creating
3-14, for details on
4-27