Editing Devices Using Dcrcli; Listing The Attributes - Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual

Using DCR Features Through CLI

Editing Devices Using dcrcli

Step 1
Step 2
Step 3

Listing the Attributes

Step 1
Step 2
Step 3
User Guide for CiscoWorks Common Services
4-40
To modify devices using dcrcli
Enter NMSROOT
/bin/dcrcli
Enter the password.
Enter value
mod id= ip=
Enter the Device ID (id).
Enter either the IP Address (ip), Hostname (hn), or Device Identity (di).
Enter the Display Name (dn) and the Attribute name (-a attname). You can add
multiple attributes. For example,
mod id=54341 ip=2.2.2.2 dn=cisco.com -a display_name=new_name
To view the list of all attributes:
Enter NMSROOT
/bin/dcrcli
Enter the password corresponding to the username
Enter
lsattr
This lists Attribute Name, Attribute Description, and Attribute Type.
Attribute Type is a constant that identifies an Attribute Name.
Example:
Attribute Type 1072 identifies the attribute name display_name
Chapter 4
-u username.
value value value
hn= di=
-u username.
Managing Device and Credentials
value
dn= -a attname=
78-16571-01
value