Setting Up Peer Server Certificate - Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual

Setting up Peer Server Certificate

Step 1
Step 2
Step 3
Step 4
Step 5
Setting up Peer Server Certificate
Step 1
Step 2
Step 3
User Guide for CiscoWorks Common Services
3-14
See "Master-Slave Configuration Prerequisites" section on page 4-27
"Enabling Single Sign-On" section on page 3-15
this features.
To add a System Identity user:
In the CiscoWorks Homepage, select Common Services > Server > Security >
System Identity Setup
Enter the username in the Username field.
Enter the password in the Password field.
Re-enter the password in the Verify field.
Click Apply.
You can add the certificate of another CiscoWorks Server into it's trusted store.
This will allow one CiscoWorks Server to communicate to another. If a
CiscoWorks Server needs to communicate to another CiscoWorks Server, it must
possess the Certificate of the other server. You can add Certificates of any number
of peer CiscoWorks Servers to the trusted store.
To add peer CiscoWorks Server certificates:
In the CiscoWorks Homepage, select Common Services > Server > Security>
Peer Server Certificate Setup.
The Peer Server Certificate page appears with a list of certificates imported from
other servers.
Click Add.
Enter the IP address/hostname of peer CiscoWorks Server in the corresponding
fields.
Chapter 3 Configuring the Server
and
to know more on the usage of
78-16571-01