Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual page 200

System Defined and User Defined Attributes
Attribute
Series
Model
MDFId
The User Defined Fields available in the Variable drop-down list is taken from
DCR. You can create Used Defined Fields at Common Services >
Device and Credentials > Admin For details, see
section on page
If you create a User Defined Field which is similar to one of the predefined
System Defined attributes, an
you add, to distinguish these two attributes.
For example if you create a User Defined Field called DisplayName (which is one
of the pre-defined attribute present in the Variable drop-down list), this will be
displayed as DisplayName_UDF.
You should not create a User Defined fields in the format
Note
System Defined Field_UDF, where System Defined Field stands for any attribute
listed in the above table.
By default, four user defined fields are available. You can create 12 user defined
fields in DCR. The maximum number of user defined fields that can be added in
the Variable drop-down list is 16.
User Guide for CiscoWorks Common Services
5-24
Description
Series to which the device belong. The second level
entries in the Device Type tree in DCR Device
Management UI. For example,
, that falls under the category
Routers
Model of the device. The third level entries in the
Device Type tree in DCR Device Management UI.
For example, the model
under the
Cisco 3100 Series Routers
under the category
Normative name for the device type as described in
Cisco's Meta Data Framework (MDF) database.
Each device type has a unique normative name
defined in MDF.
4-29.
suffix is appended to the User Defined field
_UDF
Chapter 5 Administering Groups
Cisco 3100 Series
Routers
Cisco 3101 Router
, which comes
.
Routers
"Adding User-defined Fields"
.
falls
78-16571-01