Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual page 188

DCR Mode Changes and Group behavior
Table 5-1 DCR Mode Changes and Group Behavior (continued)
Mode Changed to:
The initial Standalone
mode
Slave
Groups UI gets enabled. The
groups pertaining to Master and
Slaves will be removed.
The Slave's groups will
disappear from the Master.
The groups pertaining to the
Slave whose mode was changed
will disappear from other
Slaves in the cluster.
Master All dependent Slaves will
switch to Standalone mode. All
groups pertaining to other
machines will be removed.
Groups UI will be enabled on
all machines in the cluster.
User Guide for CiscoWorks Common Services
5-12
Slave
Not applicable.
If you select the Inform
current Slaves of new
Master Hostname check
box when you change the
mode to Slave, all the
Slaves in the domain,
switch to the new Master.
In this case, application
groups of all the Slaves in
the domain, and the
groups in the Master will
be seen in the new Slave.
The Groups UI will be
disabled.
If the check box is not
selected, the new Slave
will pickup the groups of
the new Master. Other
Slaves in the domain will
move to Standalone mode.
Chapter 5 Administering Groups
Master
Groups UI gets enabled.
Groups pertaining to the
previous Master and the
associated Slaves will be
removed.
Not applicable.
78-16571-01