Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual page 43

Chapter 2 Interacting With CiscoWorks Homepage
On Windows:
You can change the web server port numbers (for HTTP and HTTPS) for the
CiscoWorks Webserver.
To change the port numbers you must have administrative privileges. Run the
following command at the prompt:
CSCOpx\MDC\Apache\changeport.exe
If you run this utility without any command line parameter, CiscoWorks displays
the following usage text:
*** Common Services Webserver port change utility ***
Usage: changeport <port number> [-s] [-f]
where:
For example, you can enter:
changeport 1744
1744.
Or
changeport
port to use the specified port number.
78-16571-01
port number—The new port number that should be used
-s—Change the SSL port instead of the default HTTP port
-f—Force port change even if Daemon Manager detection fails.
Do not use this option by default. Use it only when CiscoWorks
Note
instructs you to use.
—Changes the Common Services web server HTTP port to use
port number —Changes the Common Services web server HTTPS
-s
User Guide for CiscoWorks Common Services
Changing Web Server Port Numbers
2-17