Cisco CISCOWORKS COMMON SERVICES 3.0 User Manual page 254

Frequently Asked Questions
The change port utility displays messages to the console during execution. These
messages contain information about the directory where the backup files are being
stored. These messages are also logged to a file, changeport.log
This file is saved to the directory:
/var/adm/CSCOpx/log/changeport.log
This file contains the date and time stamps to indicate when the log entries were
created.
On Windows:
You can change the web server port numbers for the Common Services
Webserver. You can also change both the HTTP and HTTPS port numbers.
To change the port numbers you must have administrative privileges. Run the
following command at the prompt:
CSCOpx\MDC\Apache\changeport.exe
If you execute this utility without any command line parameter, CiscoWorks
displays the following usage text:
*** Common Services Webserver port change utility ***
Usage: changeport <port number> [-s] [-f]
where:
User Guide for CiscoWorks Common Services
8-28
port number—The new port number that should be used
—Change the SSL port instead of the default HTTP port
-s
—Force port change even if Daemon Manager detection fails.
-f
Do not use this option by default. Use it only when CiscoWorks
Note
instructs you to.
Chapter 8 Diagnosing Problems With CiscoWorks Server
78-16571-01