Spe Firmware - Cisco AS5400XM Quick Start Manual

For detailed information about the universal port and dial-only feature card CLI commands, see the Monitoring Voice
Note
and Fax Services on the Cisco AS5350 and Cisco AS5400 Universal Gateway document, which is available online at
the following URL:
http://www.cisco.com/en/US/docs/ios/12_1t/12_1t5/feature/guide/ftupspe.html

SPE Firmware

SPE firmware is automatically downloaded to universal port or dial-only feature cards from the Cisco AS5350XM or
Cisco AS5400XM universal gateway when you boot the system for the first time or when you insert a universal port or dial-only
feature card while the system is operating. When you insert feature cards while the system is operating, the Cisco IOS image
recognizes the cards and downloads the required firmware to the cards.
The SPE firmware image is bundled with the universal gateway Cisco IOS image. The SPE firmware image uses an autodetect
mechanism that enables the universal port and dial-only feature cards to service multiple call types. An SPE detects the call type
and automatically configures itself for that operation. The firmware is upgradable independent of Cisco IOS upgrades, and
different firmware versions can be configured to run on SPEs in the same feature card.
The universal port and dial-only feature cards support the modem standards and features listed in Table 6.
Table 6 Modem Standards and Supported Features
Feature
Carrier protocols
Error-correcting link-access protocols V.42 LAPM, MNP 2-4
Compression protocols
Command interface
In-band signaling/tone generation
and detection
Other
52
Description
ITU V.23 at 75/1200 bps
Telcordia Technologies 103 at 300 bps
ITU V.21 at 300 bps
ITU V.22 at 1200 bps
Telcordia 212A at 1200 bps
ITU V.22bis at 2400 bps
ITU V.32 up to 9600 bps
ITU V.32bis up to 14,400 bps
V.32 turbo up to 19,200 bps
V.FC up to 28,800 bps
V.34 up to 28,800 bps
V.34+ up to 33.6 bps
TIA/ITU V.90
K56flex
V.42bis (includes MNP 5)
Superset of the AT command set
Dual-tone multifrequency (DTMF) generation
DTMF detection
Multifrequency (MF) generation
MF detection
Out-of-band access for management
PPP and SLIP framing