Table of Contents
Advertisement
Monitoring and maintaining the system
•
If the new database or load balancer is identified by a new IP address or fully qualified domain name, then do the
following on each server:
1
Make sure the time is synchronized among all system components using an NTP server.
2
From the Services control panel, stop the Lexmark Solutions Application Server service.
3
In the file \Lexmark\Solutions\apps\wf‑ldss\WEB‑INF\classes\adaptor.properties where the server is installed,
change each of the properties adaptor.address and adaptor.canonicalhostname to the IP address
or fully qualified domain name of the new load balancer.
Note: If the setting is currently an IP address, then use the IP address of the load balancer. Likewise, if the
setting is currently a fully qualified domain name, then use the fully qualified domain name of the load
balancer.
4
Change the URL for the desktop shortcut to LMC on the server:
a
In the folder \Lexmark\Solutions\apps\wf‑ldss\, right click the shortcut lmc, and then click Properties.
b
Change the IP address or host name part of the URL to the new IP address or host name of the new load
balancer. The complete URL should be http://hostname:9780/lmc/, where hostname is the host
name or IP address of the new load balancer.
5
If you are using a new database, then locate the file
\Lexmark\Solutions\apps\wf‑ldss\WEB‑INF\classes\database.properties where the server is installed, and then
change the property database.hostname to the fully qualified domain name of the new database.
Note: If you are using an IP address for this setting because the network does not have a reliable DNS, then
you can use the IP address of the new database.
6
From the Services control panel, start the Lexmark Solutions Application Server service.
7
Perform a policy update for all device groups, making sure to clear the Only update those devices which are
Out of Policy check box.
8
From the System tab in LMC, set the servers online. For more information, see "Viewing and changing server
status" on page 56.
Recreating Lexmark Intelligent Capture printer ports after an address change
If the new load balancer is identified by a new IP address or fully qualified domain name after a recovery, then you
must recreate any Lexmark Intelligent Capture printer ports on software clients.
1
In the printers control panel in Windows, right‑click a Lexmark Intelligent Capture print queue, and then click
Properties.
Note: For more information about accessing the properties for the Lexmark Document Server port, see
"Configuring a Lexmark Document Server port in Windows 7, Windows Vista, Windows Server 2008, or Windows
Server 2008 R2" on page 117.
Click the Ports tab > Add Port > Lexmark Document Server Port ‑ Enterprise > New Port.
2
Note: The port name must be 75 characters or fewer.
3
Add the new Lexmark Document Server:
a
Click Manage List.
b
From the Server Setup dialog, click Add.
c
Type the fully qualified domain name or IP address of the load balancer, and then click OK.
d
Select the old load balancer from the list, then click Remove, and then click Yes to confirm removal.
e
Click OK to exit the Server Setup dialog.
89
Advertisement
Table of Contents
