Creating A Device Group From An Existing Device Group; Configuring Policy Updates; Creating A New Discovery Profile - Lexmark 634dte - X B/W Laser Administrator's Manual

Managing device groups and devices

Creating a device group from an existing device group

1
Click the Device Groups tab.
2
Under the Device Groups list, click Add.
3
Type a unique name for the new device group.
4
Select the existing group to copy, and then click Add.
The following settings are copied from the existing device group to the new device group:
• Solution associations
• Solution settings
• eSF application associations
•
eSF application settings
•
Home screen configurations
•
Fax forwarding configurations
• Security settings

Configuring policy updates

1
Click the Services tab.
2
Select PolicyUpdate from the Services list.
3
If necessary, select Parameters from the Tasks list.
4
Type a timeout period in seconds for each device during a policy update.
The timeout setting for the PolicyUpdate service determines how long the system waits for a printer to respond
after it is initially connected during a policy update.
Note: If a large eSF application or several eSF applications are included with a hybrid solution, then you may
need to increase the default timeout for policy updates in order to allow enough time for policy updates that
include eSF application deployments to complete.
5
Select the Overwrite all function overrides on the device check box.
Note: If there are eSF applications installed on the device that can override the device function, then clear the
Overwrite all function overrides on the device check box. Otherwise, this setting should be selected at all times.
6
Click Apply.

Creating a new discovery profile

1
Click the Device Groups tab.
2
Select a device group from the Device Groups list.
3
Select Discovery Profiles from the Tasks list.
4
Type the IP address, address range, subnet, host name, or fully qualified domain name in the Address field.
96