Configuring Card Copy Premium; Configuring The Network And E-Mail Function Of The Printer; Configuring Output Options - Lexmark Apps Administrator's Manual

Configuring Card Copy Premium

Configuring Card Copy Premium
Configuring the network and e‑mail function of the printer
This application uses the network and e‑mail server setup and options of the printer. Before running the application,
you must first complete the network and e‑mail server setup.
For more information on configuring the network and e‑mail settings of the printer, see the User's Guide and other
networking information on the Software and Documentation CD that came with the printer.

Configuring output options

1
Access the application configuration settings from the Embedded Web Server.
2
Change the default output options if necessary:
Selecting output options
•
Print output—Select this option to print the scanned card.
• Email output—Select this option to send the scanned card as an e‑mail attachment.
•
Network Share Output—Select this option to save the scanned card to a shared folder on the network.
Note: You can select all or any of the three output options. These options can also be changed from the
application on the printer.
•
Scan file format—Specify the output format (TIFF, JPEG, or PDF) of the scanned card.
Configuring e‑mail settings
• Default email address—Specify the destination e‑mail address for the scanned card. Use a comma to separate
multiple e‑mail addresses.
Configuring network destination settings
•
Destination Server Address—Type the server name or IP address of the shared network folder, with the format
\\server\share.
•
Domain (Optional)—Type the Windows domain for the destination if the destination resides within a different
Windows domain than the printer.
• Username—Type the default user name to connect to the destination.
•
Password—Type the default password to connect to the destination.
•
Authentication Type—Select how users are authenticated when connecting to the destination.
•
Append Timestamp—Select the check box to add a time stamp to the file name.
3
Save or discard your changes. Do one of the following:
• Click Restore Defaults to restore all fields to factory default settings.
•
Click Reset to cancel changes to all fields and begin again.
•
Click Apply to save changes to the profile.
Note: Reset and Apply are the only options available on certain devices.
4