Licensing The Printer - Lexmark Apps Administrator's Manual

Collecting the Host ID
1
Click or Start > All Programs or Programs > Lexmark > Lexmark License Server > License Administration
Tools.
2
Click the System Settings tab.
3
Record the Host ID (MAC address).
4
Contact your Lexmark representative, and provide the Host ID.
The Host ID is required to generate the license file.

Licensing the printer

Using a local license
Using the Embedded Web Server
1
From the Embedded Web Server, click Settings or Configuration.
2
Click Device Solutions > Solutions (eSF), or click Embedded Solutions.
3
Under Installed Solutions, click the appropriate application link.
4
Click License > Update License.
5
Make sure Local is selected, and then click Browse to locate the license file.
6
Click Update License.
Using MarkVision Professional
1
In MarkVision Professional, select the device where the application is installed.
2
Click Settings > Embedded Solutions > Solutions Management.
3
Under the appropriate application, click Update License.
4
In the Update License window, select Use a local license file.
5
Click Browse to locate the license file.
6
Click Update License.
Using a network license
Copying the license file to the Lexmark License Server
Note: Before installing a network license using either the Embedded Web Server or MarkVision Professional, copy the
license files to the license server.
1
Copy the license file to the following directory on the network license server:
C:\Program Files\Lexmark\LicenseServer\Licenses
2
On the host computer, open the Control Panel.
3
Under Administrative Tools, click Services.
Configuring the application
7