Table of Contents
Advertisement
Managing software clients
Configuring a Lexmark Document Server port in Windows 7,
Windows Vista, Windows Server 2008, or Windows Server 2008
R2
Creating a new print queue using the Lexmark Document Server port
1
In the Printers folder, right‑click Add Printer, and then click Run as administrator.
Note: If you are using Windows 7 or Windows Servers 2008 R2, then click Add Printer.
2
Follow the instructions on the computer screen, clicking Continue for any User Account Control prompts. For more
information, see "Adding Lexmark Intelligent Capture printers on a client workstation or print server" on page
115.
Configuring or adding a Lexmark Document Server port in an existing print queue in Windows 7
or Windows Server 2008 R2
Note: You must be logged in as an administrator.
1
In the Devices and Printers folder, right‑click the print queue.
2
Configure or add a Lexmark Document Server port:
In Windows 7
Right‑click the print queue, and then click Print Properties > Ports tab.
In Windows Server 2008 R2
Click Print Server Properties > Ports tab > Change Port Settings.
3
Click Configure Port to configure an existing port, or click Add to add a new port.
4
If the Printer Ports dialog is still open, then click Close.
Configuring or adding a Lexmark Document Server port in an existing print queue in Windows
Vista or Windows Server 2008
Note: You must be logged in as an administrator.
1
In the Printers folder, right‑click the print queue.
2
Click Run as administrator > Properties > Continue > Ports tab.
3
Click Configure Port to configure an existing port, or click Add to add a new port.
117
Advertisement
Table of Contents
