Page 1
Showroom Administrator's Guide November 2010 www.lexmark.com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. All other trademarks are the property of their respective owners.
November 2010 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Contents Edition notice....................2 Configuring the application................5 Accessing the Embedded Web Server.......................5 Changing display icons and labels......................5 Licensing the application...........................5 Configuring Showroom..........................8 Exporting and importing configuration files....................9 Using the application from the printer control panel........10 Running a slideshow..........................10 Troubleshooting..................11 Showroom troubleshooting........................11 Index......................12 Contents...
If you plan to use the application with several printers, you may prefer to install the Lexmark License Server and obtain a network license for the appropriate number of devices.
After the Lexmark License Server installation is complete, click Done. Collecting the Host ID Click or Start > All Programs or Programs > Lexmark > Lexmark License Server > License Administration Tools. Click the System Settings tab. Record the Host ID (MAC address).
After locating the appropriate license file, click Update License. Using a network license Copying the license file to the Lexmark License Server Note: Before installing a network license, copy the license files to the license server. Copy the license file to the following directory on the network license server: C:\Program Files\Lexmark\LicenseServer\Licenses On the host computer, open the Control Panel.
Updating the network license From the Embedded Web Server, do one of the following: • Click Settings > Device Solutions >Embedded Solutions. • Click Settings or Configuration >Embedded Solutions. Under Installed Solutions, click the name of the application you are licensing. Click License.
For Directory path, type the name of the image file folder you created on your USB drive. Under Slide Show Settings, specify the Global interval by typing the number of seconds each slide should be displayed before changing. Check the Repeat box to re-run the slideshow on a continuous basis. Click Apply.
Using the application from the printer control panel Running a slideshow Notes: • The slideshow must first be configured using the Embedded Web Server. For more information, see “Creating a slideshow” on page 8. • The application may be configured for use with images loaded through the Embedded Web Server and images on a USB drive.
• Support the FAT file system (NTFS file system not supported) For a list of tested and approved USB flash drives, visit the Lexmark Web site at www.lexmark.com. Nothing happens when USB drive is inserted If nothing happens within a few seconds after you insert your USB drive, then the USB ports may be disabled on the printer.
Need help?
Do you have a question about the C925 and is the answer not in the manual?
Questions and answers