Table of Contents
Advertisement
Managing software clients
In a CSV and TXT file, each line must contain a single IP address of a software client. An XML file is structured like the
following example:
<?xml version="1.0" encoding="UTF‑8" ?>
<filters>
<filter>
<address>10.10.2.200</address>
</filter>
<filter>
<address>10.10.2.150</address>
</filter>
</filters>
Assigning solutions to a software client group
Assigning a solution to a software client group grants the software clients in the group access to the solution on the
server, which allows users of these software clients to execute jobs using the solution.
1
Click the Software Client Groups tab.
2
Select a software client group from the Software Client Groups list.
3
Select Solutions from the Tasks list.
4
In the main section, click Add.
5
Select the solution from the list, and then click Next.
6
Configure the local settings of the solution for the current software client group, and then click Finish.
Installing client software
Do the following on a client computer or print server:
1
From the installation package, run Setup.exe.
2
Click Install Enterprise System > Install Client Software.
3
Click Agree to accept the license agreement.
4
Make sure Client Software is selected and highlighted. If necessary, specify a location for the installation.
5
To include Select'N'Send in the installation, select Select'N'Send from the list.
Note: Do not install Select'N'Send on a print server.
6
To include the Lexmark Document Server Port in the installation, select the Lexmark Document Server Printer
Port check box.
7
Click Finish, and then allow the installation to complete.
8
If prompted, select Yes to restart the computer. Otherwise, click Done to finish the installation.
9
Run Windows Update to make sure the latest updates for the .NET framework are installed.
114
Advertisement
Table of Contents
