Monitoring and maintaining the system
Repairing common server problems
Click Fix to repair several common problems that occur in the system.
The Fix button does each of the following as necessary:
•
Set all servers online.
•
Run a discovery for the associated device group.
•
Update policies on associated printers.
•
Reload the license files on the server system.
Printers that are powered off when using the Fix button are placed in the Not Communicating category. To recover
communication with a printer in the Not Communicating category, turn on the printer, and then click Fix again.
Adding printers to a server
Adding a printer using the Solution Status Page adds the printer to the device group associated with the solution and
runs a discovery to initiate communication with the printer. Each printer added uses one of the available licenses on
the server.
1
Make sure the printers being added are turned on.
2
In the right pane of the Solution Status Page, click Add.
Note: The Add button is available only if the server has unused licenses.
77