The Solution Stops Responding; The Solution Cannot Connect To The Network; Solving Problems With Client Software; Cannot Create New Lexmark Document Server Ports - Lexmark 634dte - X B/W Laser Administrator's Manual

Troubleshooting
Install the Advanced Prompting Bundle manually:
a
Type the printer IP address or host name in the address field of your Web browser.
Note: If you do not know the IP address or host name of the printer, then you can:
•
View the information on the printer control panel home screen, or in the TCP/IP section under the
Networks/Ports menu.
• Print a network setup page or menu settings page and locate the information in the TCP/IP section.
b
Click Settings > Embedded Solutions > Install > Browse.
c
Locate and select the file ap.fls in the folder \Lexmark\Solutions\apps\wf-ldss\firmware\ where an the server
is installed, and then click Open.
d
Click Start Install.

The solution stops responding

If the network connection is lost on some printers, then the solution may stop responding.
1
Make sure the network cable is plugged into the printer and into the appropriate network outlet.
2
Wait a few minutes to see if the network connection returns, and then access the solution.
3
If the solution does not continue, then do the following:
a
Turn off the printer.
b
Wait a few seconds, and then turn the printer on.
c
Check the printer network settings and the status of the network. For more information, see the documentation
that came with the printer. For help with your local network, contact your network administrator.

The solution cannot connect to the network

Check the local domain settings in the proxy server settings of the printer. If necessary, add the domain on the local
network that will bypass the proxy server.

Solving problems with client software

Cannot create new Lexmark Document Server ports

1
Make sure at least one server is online using the System Status task on the System tab in LMC.
2
Make sure you have a license installed for software clients:
a
Click the System tab.
b
Select Licenses.
c
Make sure one of the listed licenses applies to clients, and is not expired.
For more information, see "Activating Lexmark Intelligent Capture licenses" on page 22.
135