Setting Up A Basic Library; Creating The Basic Library - Novell GROUPWISE 8 - LIBRARIES AND DOCUMENTS Manual

NOTE: On Linux, ConsoleOne interprets a UNC path so that the first item in the UNC path is the
Linux server hostname, followed by a Linux path to the document storage area.
BASIC LIBRARY WORKSHEET
If you entered No for
Under Item 5: Document Storage Area
area. (This description is displayed only in ConsoleOne.)
If you need to add a document storage area to the initial library that was created with the first post
office in your GroupWise system, use the Storage Areas properties page of the Library object in
ConsoleOne to provide the direct access path, as described in
on page 336.

22.2 Setting Up a Basic Library

You should already have reviewed
out Section 22.7.1, "Basic Library Worksheet," on page
a new basic library:
Section 22.2.1, "Creating the Basic Library," on page 316
Section 22.5, "Viewing a New Library in Your GroupWise System," on page 332

22.2.1 Creating the Basic Library

To create a new library:
1 Make sure the POA is running for the post office that will own the new basic library.
2 In ConsoleOne, browse to and right-click the Novell
to create the library
3 Double-click GroupWise Library, then fill in the fields in the Create GroupWise Library dialog
box (worksheet
316 GroupWise 8 Administration Guide
Item 4, specify the direct access path under
Description, enter a useful description of the document storage
Section 22.1, "Planning a Basic Library," on page 313
(worksheet item 1), then click New > Object.
items 2 through 6).
Item 6: Document Storage Area
"Adding a Document Storage Area"
346. Complete the following tasks to set up
®
eDirectory container where you want
TM
Path.
and filled