BASIC LIBRARY WORKSHEET
If you entered No for
Under
area. (This description is displayed only in ConsoleOne.)
If you need to add a document storage area to the initial library that was created with the first post
office in your GroupWise system, use the Storage Areas properties page of the Library object in
ConsoleOne to provide the direct access path, as described in
on page
22.2 Setting Up a Basic Library
You should already have reviewed
out
Section 22.7.1, "Basic Library Worksheet," on page
a new basic library:
22.2.1 Creating the Basic Library
To create a new library:
1 Make sure the POA is running for the post office that will own the new basic library.
2 In ConsoleOne, browse to and right-click the Novell
3 Double-click GroupWise Library, then fill in the fields in the Create GroupWise Library dialog
302 GroupWise 7 Administration Guide
Item
4, specify the direct access path under
Item 5: Document Storage Area
321.
Section 22.2.1, "Creating the Basic Library," on page 302
Section 22.5, "Viewing a New Library in Your GroupWise System," on page 318
to create the library
(worksheet item
box (worksheet
items 2 through
Description, enter a useful description of the document storage
Section 22.1, "Planning a Basic Library," on page 299
331. Complete the following tasks to set up
®
eDirectory
1), then click New > Object.
6).
Item 6: Document Storage Area
"Adding a Document Storage Area"
container where you want
TM
Path.
and filled