Cisco CRS-1 - Carrier Routing System Router Getting Started Manual page 93

Chapter 4 Bringing up a New Cisco CRS-1 Router
In the following example, temperature information for the router is shown:
RP/0/RP0/CPU0:router# show environment temperatures
R/S/I
0/2/*
0/RP1/* host
0/SM0/* host
In the following example, LED status of the nodes in the router is shown:
RP/0/RP0/CPU0:router# show environment leds
0/2/*: Module (host) LED status says: OK
0/2/*: Module (plimasic) LED status says: OK
0/SM0/*: Module (host) LED status says: OK
Refer to the "Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software"
section in the Cisco IOS XR Interface and Hardware Component Command Reference for more
information.
show platform Command
The following is sample output from the show platform command for all nodes in a router:
RP/0/RP0/CPU0:router# show platform
Node
-----------------------------------------------------------------------------
0/0/SP
0/0/CPU0
0/2/SP
0/2/CPU0
0/RP0/CPU0
0/RP1/CPU0
0/SM0/SP
In the following example, information is shown for a single node in the system:
RP/0/RP0/CPU0:router# show platform 0/2/cpu0
Node
-----------------------------------------------------------------------------
0/2/CPU0
For more information on nodeID, see the
section on page
Modules Inlet
Temperature
(deg C)
host 31, 27
cpu
fabricq0
fabricq1
ingressq
egressq
ingresspse
egresspse
plimasic 30, 31
38
cpu
ingressq
fabricq0
29, 29
Type
MSC(SP)
MSC
MSC(SP)
MSC
RP(Standby)
RP(Active)
FC/S(SP)
Type
MSC
7-4.
Bringing Up a Single-Chassis System for the First Time
Exhaust
Temperature
(deg C)
43, 45
41
42
PLIM State
N/A IOS-XR RUN
16OC48-POS/DPT IOS-XR RUN
N/A IOS-XR RUN
16OC48-POS/DPT IOS-XR RUN
N/A IOS-XR RUN
N/A IOS-XR RUN
N/A IOS-XR RUN
PLIM State
16OC48-POS/DPT IOS-XR RUN
"Command Syntax for Hardware Nodes (location nodeID)"
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
Hotspot
Temperature
(deg C)
48
31
46
44
34
43
35
42
44
36
42
43
41, 33
Config State
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
Config State
PWR,NSHUT,MON
4-11