Browsing Display Output When The --More-- Prompt Appears; Halting The Display Of Screen Output - Cisco CRS-1 - Carrier Routing System Router Getting Started Manual

Chapter 3 CLI Tips, Techniques, and Shortcuts

Browsing Display Output when the --More-- Prompt Appears

When command output requires more than one screen, such as for the ?, show, or more commands, the
output is presented one screen at a time, and a --More-- prompt is displayed at the bottom of the screen.
To display additional command output, do one of the following:
•
•
The following example show one screen of data and the --More-- prompt:
RP/0/RP0/CPU0:router# show ?
aaa
adjacency
aliases
alphadisplay
aps
arm
arp
as-path-access-list
asic-errors
atc
auto-rp
bgp
buffer-manager
bundle
calendar
cdp
cef
cetftp
checkpoint
cinetd
clns
clock
commit
--More--
If you do not see the --More-- prompt, try entering a value for the screen length with the terminal
Tips
length command in EXEC mode. Command output is not paused if the length value is set to zero.
The following example sets the terminal length:
RP/0/RP1/CPU0:router# terminal length 20
For information on searching or filtering CLI output, see the
on page

Halting the Display of Screen Output

To interrupt screen output and terminate a display, press Ctrl-C, as shown in the following example:
RP/0/RP0/CPU0:router# show running-config
<Ctrl-C>
Press Return to display the next line.
Press Spacebar to display the next screen of output.
Show AAA configuration and operational data
Adjacency information
Display alias commands
Shows the message being displayed on the alpha display
SONET APS information
IP ARM information
ARP table
List AS path access lists
ASIC error information
Attractor Cache related
Auto-RP Commands
BGP show commands
Show all buffer manager memory related information
Show hardware related information for Bundles.
Display the system calendar
CDP information
Cisco Express Forwarding
HFR control plane ethernet TFTP server
Show checkpoint services
cinetd daemon
Display CLNS related information
Display the system clock
Show commit information
3-9.
Displaying System Information with show Commands
"Filtering show Command Output" section
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
3-7