Displaying Configuration Details With Show Commands - Cisco CRS-1 - Carrier Routing System Router Getting Started Manual

Managing Configuration Sessions
To display the inactive changes, use the show configuration command:
Step 3
RP/0/RP0/CPU0:router(config-if)# show configuration
Building configuration...
interface POS0/0/0/1
description faq
ipv4 address 10.10.10.10 255.0.0.0
end
Enter the commit command for the changes to become part of the currently running configuration:
Step 4
RP/0/RP0/CPU0:router(config-if)# commit
RP/0/RP0/CPU0:Apr
ration committed by user 'user_a'.
he changes.
You can save the target configuration to a file. See the
Note
section on page 2-27

Displaying Configuration Details with show Commands

Table 2-5
target configuration, the running configuration, or a combination of both.
Table 2-5
Command
show running-config
show configuration
show configuration merge
You can use the show running-config command in the EXEC mode to display the contents of the
Note
running configuration.
The following sections provide examples of displaying configuration details:
•
•
•
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
2-16
5 22:55:42.044 : config[65709]: %LIBTARCFG-6-COMMIT : Configu
for more information.
summarizes the commands used in global configuration mode to display the contents of the
Configuration show Commands in Global Configuration Mode
Displaying the Current Running Configuration, page 2-17
Displaying the Target (Nonactive) Configuration Changes, page 2-17
Displaying the Merged Configuration Before Committing the Changes, page 2-17
Chapter 2
Use 'show commit changes 1000000010' to view t
"Saving and Loading Target Configuration Files"
Description
Displays the contents of the active running configuration. This is
the committed configuration that defines the router operations.
Displays the changes made to the target configuration. These are
the changes that have been entered but not yet committed.
Displays the combined contents of the target and running
configuration without committing the changes.
Cisco IOS XR Basic Configuration Management