Cisco CRS-1 - Carrier Routing System Router Getting Started Manual page 184

Performing an OIR
Prerequisites
You should have a working knowledge of Cisco IOS XR software and have sufficient permissions to
configure the software.
You must log in as root-system before starting the procedure. To confirm your login status, use the
show user all command:
RP/0/RP0/CPU0:router# show user all
Username: lab
User group root-system
User group cisco-support
To confirm your login status including root, use the show user all | include root command:
RP/0/RP0/CPU0:router# show user all | include root
User group root-system
Task:
Task:
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
8-2
root-system
root-lr
show platform
admin configure
show controller fabric plane all
controller fabric plane plane_number shut
show controller fabric plane all
no hw-module node fabric_card power
hw-module node fabric_node power
no controller fabric plane plane_number shut
show controller fabric plane all
Chapter 8
: READ WRITE EXECUTE
: READ WRITE EXECUTE
Online Insertion and Removal for Switch Fabric Cards
NOTIFY
NOTIFY