Removing Inactive Packages From The Router - Cisco CRS-1 - Carrier Routing System Router Getting Started Manual

Chapter 6 Managing Cisco IOS XR Software Packages
Node 0/2/SP [SP]
Boot Image: /disk0/hfr-os-mbi-1.0.0/sp/mbihfr-sp.vm
Active Packages:
Node 0/2/CPU0 [LC]
Boot Image: /disk0/hfr-os-mbi-1.0.0/lc/mbihfr-lc.vm
Active Packages:
Node 0/3/SP [SP]
Boot Image: /disk0/hfr-os-mbi-1.0.0/sp/mbihfr-sp.vm
Active Packages:
Node 0/3/CPU0 [LC]
Boot Image: /disk0/hfr-os-mbi-1.0.0/lc/mbihfr-lc.vm
Active Packages:
Node 0/RP0/CPU0 [RP]
Boot Image: /disk0/hfr-os-mbi-1.0.0/mbihfr-rp.vm
Active Packages:
Node 0/SM0/SP [SP]
Boot Image: /disk0/hfr-os-mbi-1.0.0/sp/mbihfr-sp.vm
Active Packages:

Removing Inactive Packages from the Router

To remove a package or SMU from the router, you must first deactivate the package, and commit the new
active software set so it does not include the package. The three steps to remove inactive software are as
follows:
1.
2.
3.
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
disk0:hfr-lc-1.0.0
disk0:hfr-fwdg-1.0.0
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
disk0:hfr-lc-1.0.0
disk0:hfr-fwdg-1.0.0
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
disk0:hfr-rout-1.0.0
disk0:hfr-lc-1.0.0
disk0:hfr-fwdg-1.0.0
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
disk0:hfr-admin-1.0.0
disk0:hfr-base-1.0.0
disk0:hfr-os-mbi-1.0.0
install deactivate package
install commit
install remove package
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
Package Management Procedures
6-29